source: sensible-heat.com

Types of Furnace You Can Install in Your Home

Quality heating is an absolute must for every home, especially in countries where the temperatures go below zero every winter.

No one wants to sit in a jacket in his apartment trembling with cold. This is why it is important to have your heating in the perfect condition even before the season starts, so there are no problems of any kind when the winter begins and you actually need your heating to work flawlessly.

The types of furnace

source: enersure.ca

Choosing the perfect heating equipment can sometimes be very challenging because, with so many options on the market, it is not easy to make the right decision. However, we’re here to give you all the information you need to decide which heating system would be perfect for you. There are three furnace types that you should be aware of:

1. Single-stage furnace
2. 2-stage furnace
3. Modulating furnace

Each of these options is great if you want to have heating with no issues whatsoever, however, the type you choose depends on the type of home you have, the budget you plan to invest and the efficiency level you want to accomplish.

A single-stage furnace is the choice of many because it is the most basic and common type. If only it has one setting, so when the furnace is on it operates on its maximum flame setting. If you choose this type of furnace, you should know that you cannot set the system in between for some optimal temperature, it is either on or off, which impacts its efficiency. It is a great option for people who don’t spend much time in their home, so when they have their heating on, it needs to be as effective as possible.

However, if you want a more efficient option and save some money along the way, then choosing a two-stage furnace may be a way to go. What is special about this model is that it has the option to set it to medium heating, which will give you a bigger control of temperature in your home.

Even though these are more expensive when compared to a single-stage furnace, this type of furnace is more cost-effective in the long run. This is particularly important for families with small kids because spending more time at home also means spending more money on heating bills, so having the option to adjust the heat and lower it from time to time means also that you will be able to save some money, but also have the comfort you want in your own home.

Modulating furnace is the advanced type of furnace. It is a more sophisticated model that enables a stable temperature in a home. If you want to avoid fluctuations in temperature and have greater comfort in your home, then this may be the perfect model for you and your family.

Even though these furnaces have the biggest price among the three types, in the long run, it is the most cost-effective type because you will be able to adjust the heating according to your family’s needs and have a stable temperature in your entire house.

The technology behind the effectiveness of furnaces

source: binderheating.com

The technology in today’s furnaces has enabled extracting more heat from the exhaust gases with the help of condensing technology. This allows better fuel efficiency. ECM (electronically commutated motor) is a technology that uses the electrical consumption of the motor in furnaces.

This motor can reduce the electrical consumption of the furnace by 60% more than a standard motor would. These types of motors adjust the speed in order to provide an adequate flow of air. The reduced electrical consumption reduces air noise in the home.

Electronic ignition is a great investment in the technology of furnaces. They replaced the old pilot light system. With the new system, the fuel is used just for igniting. To make it easier for you to understand why this is important, it is crucial to say that the old technology meant consistent fuel consumption which resulted in greater consumption of energy.

Even though they use small quantities of fuel, the facts that it was used consistently and continuously says enough about the overall consumption. Some of the new furnaces even have a digital control board that you can control on your smartphone.

Various fueling options

source: johnmooreservices.com

Before deciding about which furnace to buy, you must think about the fuel that you will be using. Assess all the advantages and disadvantages of the available sources of energy. Furnaces that use gas are the most common choice in Canada because it is a reliable, comfortable and safe solution for heating the home. It is cost-effective and very efficient. Gas is affordable and it is compatible with smart thermostats that can be controlled remotely.

Furnaces that use propane are usually a choice of people living in rural areas. So, in this case, a propane tank needs to be installed outside of the house and connected to the furnace. The propane tank must be refilled from time to time by a local company that performs this kind of service.

It is cost-effective, but a little bit more expensive than I gas model. Refilling the tank must be performed by certified professionals. These furnaces must be monitored and checked regularly.

When it comes to such an important thing as heating and air conditioning, it is important to consult a trusted company that will be able to resolve all the issues you might have. Do your research before you decide on the type of furnace you want and consult with the professionals who will help you choose the best option.

About Ronald Lamumbe

Ronald Lamumbe

Leave a Reply

Your email address will not be published. Required fields are marked *