Even though we have stepped well into the 21st century, many everyday problems continue to follow us even today. One such problem is related to plumbing. In all homes, especially if you live in an apartment building, there are often problems with clogged pipes or poor maintenance of plumbing. It can be expensive at times. Therefore, many of us wonder: What can we do to keep our pipes and plumbing in good condition? Here are some recommendations for all of you.
Plumbing Issues Are Very Often
There is a wide range of issues with plumbing that can happen in a normal home. Some pipe issues are more typical and more often than others. Probably the most widely recognized pipes issues are additionally really simple to understand or even to fix. By solving these regular pipes problems, you can spare a lot of money. And what are the most common plumbing problems we face and how to solve them? These are the answers to some of the most usual questions…
Problem 1: Insufficient Pressure Of Water In Pipes
Very often, especially when living in an apartment building, you face the problem of insufficient pressure in the pipes. Why is this happening? There are several reasons, but the two are most common. First of all, it is very often the case that residential buildings do not have the best plumbing connection. Do you know the situation when you take a shower and suddenly the water pressure on the shower drops because one of the people has let the water run in the kitchen? We are quite certain that this has happened to many of you. On the other hand, there is a problem called the tap. In this case, be sure to check that poor water pressure affects both hot and cold water.
If both hot and cold water have the same bad pressure – the most likely cause of this problem is blockage of the aerator. This problem can be solved easily. Carefully remove the aerator, peel it off, remove any debris, and carefully return it to place. There – the problem is solved.
Problem 2: Water Slowly Leaks From The Sink
This is also one of the common problems that occurs in many households. In most cases, we all use a blocker or a guard to keep the rest of the food from entering the sink when we wash the dishes manually. However, we often forget about the grease from the plates and dishes that can easily get into the drain. It sticks to the pipe walls – and over time there is a problem with the swelling. Very often these problems can be solved by the simple use of chemical pipe cleaners, but sometimes we fail in that mission. What to do then?
Try opening a pop-up a little bit. If that doesn’t work for you, you might want to consider removing the pop-up yourself and trying to manually drain the sink. If you have a sink-cable you can use it as well in an attempt to drain the sink. However, if it is a matter of thickening or some grease deposition – it is advisable to consult an expert. There are many reasons for such a decision. Namely, professional plumbing companies like happyhiller.com and the like have special cleaning agents – but also professional tools that can get to the place where the congestion occurred. This is sometimes very important because when you look for a blocked place yourself – you can often make a mistake. In this situation, you might even make some additional damage and even rupture on the tubes – which then is an even bigger problem that can cost you a lot.
Problem 3: Issues With The Toilet
One of the most common problems is related to the toilet premises. It often happens that congestion occurs and the water does not drain quickly or at all. On the other hand, there are even more frequent problems with water running out of the toilets. Many of these problems can be easily solved, but don’t hesitate to call in for help. However, if you have some skills and tools – perhaps the problems can be resolved without calling the plumber. The first thing you need to do is detect the problem. If the toilet is leaking to you from the outside, you must first see what caused the leak, then approach the master’s work and show your skill. The most common causes of problems in your toilet are related to:
- Replacement of worn valves
- Drain valve replacement
- Replacing rubber or silicone for toilet
Poor or worn valves are often a problem in every home and can cause major problems not only on the toilet but also on other installations such as water tanks and the like. Keep in mind that after each water release, your sanitary tank is wasted, so you will need to replace the worn-out valves at some point. Are you going to do something like that on your own? Well, that depends on your knowledge and skill as well as the tools you have. However, since the valves are relatively easy to handle – you might want to try to do it yourself. If we are talking about valves related to electrical installations – we will always recommend that you use the help of professionals. Water and electricity are not a good combination when they are together, right?
As for the tools you need to have to replace worn valves – you don’t need to be a professional plumber. It is enough to have at least two pairs of pliers, a French key of the right size to unscrew the valve, to buy new valves you will install – and to have at least some sponge or cloth, just in case.
What Other Things To Pay Attention To?
It is also very important to replace the worn-out water pipes with plastic eternal pipes, rather than to allow an accident that can come out more expensive. The replacement of the cracked pipe is done by closing the main vertical in the building or the water in the shaft. Of course, water only closes when the exact location of the pipe or part of the water supply system in question is determined. After breaking through the wall, that part is cut and a bypass of a pipe is made. Honestly, it’s always better to replace the whole system than to risk the flood. However, this type of intervention requires a call to a plumbing company.